Garden flowers, plants and shrubs

Find a place in the landscape design of the site Juniper Repanda


The plants spread along the surface of the earth have long since become firmly established in everyday life for people whose work or hobby has become landscape design. One of these plants is a low, creeping shrub - juniper Repanda, characterized by unpretentious growing conditions and cold-resistant properties. The variety was bred by Irish gardeners in the 30s of the 20th century and since then the plant, beloved by many, has been grown everywhere in different countries of the world.

Juniper Repanda: Appearance and Features

Juniper ordinary Repanda is evergreen dwarf shrub. The shrub reaches its maximum size (2.5 m in diameter) by the age of 20, adding up to 10 cm per year on average, remaining undersized, 30–40 cm high. The crown is formed by often branching shoots located uniformly in all directions densely covered with needle needles, reaching a length of 6–8 mm. Unlike other varieties of juniper in Repanda, needles are not prickly, but soft. From the outside, the needles cover the characteristic silvery stripes.

The seasons have a direct impact on the color of the shrub: if in spring and summer the needles are bright and green, in the winter it becomes darker, becoming brownish-green. Adult juniper plants, and they become so by the age of 10, are decorated with small, up to a centimeter, round cones. Shrub acquires fruits in the second year of flowering. As they mature, the bumps change color from green to blue-gray, becoming covered with a whitish bloom.

Planting juniper Repanda and caring for him

Different types of juniper share one common feature - all of them are undemanding to the composition of the soil. Culture takes root well on weak acid and slightly alkaline bases, however, the most comfortable for it will be loose, moderately moist nutrient soil. Well shrub tolerates the urban environment with high air pollution.

Before landing it is recommended to prepare an earth mixture in the following composition:

  • sod land
  • peat,
  • sand,
  • fertilizer complex for conifers.

To prevent the decay of the roots of juniper, it is desirable to pre-prepare a place for planting. To do this, a drainage layer up to 20 cm thick is laid on the bottom of the pit (70 cm deep for an adult plant), using expanded clay or broken brick. If it is implied that juniper will form a living border, it is necessary to leave a distance between the bushes sufficient for their crowns to close in the process of growth. It is also important not to bury the root neck when planting. After planting the plant is useful to mulch a layer of up to 5-7 cm, which is usually used peat, sawdust or wood chips. In addition, the shrub must be watered abundantly during the week.

Carefully selected for the landing of juniper place greatly simplifies the care of the plant in the future. It is desirable to arrange the shrub in a sunny area or in partial shade, on the southern, protected side. The presence of light, loose soil with a deep location of groundwater will complement the comfortable conditions for the existence of the plant. It is enough to apply fertilizers once a year, in spring, using, for example, a nitroammophoska or Kemira station wagon.

Common juniper Repanda is able to endure frosts up to 30 degrees without special shelter. Lack of moisture plant can replenish high humidity. The variety is characterized by versatility, easily transferring the neighborhood with other floral or ornamental plants.

In the hot, dry season, juniper should be watered.. It is better to do this in the evening, when there is no risk to expose the needles to burns. Repanda poorly tolerates dry air, so regular sprinkling will help the shrub survive an unfavorable period.

In winter, young plants can be covered with spruce leaves, and adults can be covered with peat. After heavy snowfall, it is recommended to shake the Repanda so as not to damage the branches under the weight of the snow.

The creeping juniper variety does not need to be trimmed, the plant itself forms a short, round crown.

In the spring, dead and damaged branches are removed.and stocking cuttings for further plant breeding. For the same purpose, dropping layers are added, so that by the fall they will take root and become full-fledged seedlings.

This juniper variety is resistant to diseases and pests.

Description of Juniper Repanda

Perennial evergreen shrub belongs to the dwarf varieties. By the age of 10, the juniper Repanda (J. communis Repanda) has a diameter of about one and a half meters and a height not exceeding 30 cm. The bush reaches a maximum diameter of about 2.5 meters only by 15–20 years.

The crown is formed by thin, densely branching shoots, densely covered with needle-like, up to 5–8 mm long, soft needles. A characteristic feature of the variety is silver-white stripes on the outside of the needles. In the summer, the needles are green, and in winter the shrubs turn brownish-green. On adult plants of juniper common Repanda, rounded cones appear up to a centimeter in size. The ripening fruits of the green become bluish-blue, covered with a thick whitish bloom.

Juniper compact ground cover with a gain of up to 12 cm in width and about 3 cm in height will be useful:

  • on the alpine hill, on the border, as a tapeworm when you make a summer cottage,
  • despite the polluted air, in the town square,
  • as a pot plant on a terrace, balcony or patio.

The juniper variety Repanda, (in the photo juniper), is well time-tested, has excellent winter hardiness, lends itself well to reproduction by vegetative means, without losing its decorative qualities.

Planting and care for juniper Repanda

Different varieties of juniper ordinary have common features. These include undemanding to the composition of the soil.

Plants equally well acclimatize on the soil with low acidity, and with a weak alkaline reaction. However, according to the description of Juniper Repanda, the shrub grows best on loose, moderately moist and nutritious soils.

The mixture for planting is prepared on the basis of turf land, sand and peat with the addition of complex fertilizers for coniferous crops. To prevent juniper roots from being exposed to the risk of rotting, drainage is made of claydite, broken bricks at the bottom of the landing pit. If the plants are to become part of a wide free-form border, a gap is left between the bushes, sufficient for the growth and closure of the crowns.

If you choose the right place for planting, the care for Juniper Repanda will be much easier.

Ephedra light-requiring, well growing in partial shade. The best place for juniper is a site protected from the south with light drained soil and deep groundwater. Shrub can withstand:

  • frost down to –29 ° C, so he does not need a special shelter,
  • lack of lag in the soil, if sufficient air humidity is maintained,
  • the neighborhood with any floral and decorative leafy plants, which makes the variety truly universal.

In hot, dry weather, the juniper Repanda is watered. The plant is well perceived sprinkling, which is carried out in the evening, so that the needles are not at risk of burns.

Creeping juniper varieties do not need special pruning. If the rules of agrotechnology are observed, the culture independently forms a squat crown of rounded shape.

However, in the spring be sure to remove dead or damaged shoots. At this time, the cuttings are harvested to propagate the plants and the cuttings are made, which after rooting by the autumn will become full-fledged seedlings.

Juniper Repanda in landscape design

A compact ground cover juniper is an excellent choice if you want to decorate a rock garden, a rocky area, garden paths or extensive lawns. In areas with difficult terrain, sprawling plantings will help strengthen and plant trees, prevent ravines from spreading and crumbling of the ground near the stairs.

In landscape design, the juniper Repanda is used as a pot culture. Containers with shrubs that are not afraid of heat, cold and gas air, form a green island on the balcony, flat roof, on the terrace and near the entrance to the house.

For planting it is better to choose plants with a closed root system. They are better acclimatized, which is especially important if you have to grow an even green carpet or curb. Such seedlings can be transferred to the ground not only in spring, but also during the entire warm season, they are less sick and immediately begin to grow in a new place.

Juniper traits

The variety is well tested by time, resistant to cold and other adverse environmental conditions. Well propagated by vegetative way.

The plant has high decorative characteristics. It is best suited for creating fancy design solutions. It is absolutely not suitable for creating hedges.

Juniper is able to withstand temperatures up to 30 degrees, without the use of shelter.

Landscaping with juniper Repanda

Creeping juniper Repanda can be used in landscape design in various cases:

  1. The plant is an excellent choice for the decoration of rock garden, rocky terrain, garden paths and spacious lawns.
  2. In uneven areas, the plant, in addition to landscaping the slopes, helps to prevent the soil from shedding and to mask not enough beautiful places of relief.
  3. Some gardeners plant a plant in pots, having the plant on balconies, flat roofs, terraces, at the entrance to the room.
  4. Well adapting to conditions with increased pollution and air pollution, Repanda can decorate urban squares and parks with its presence.

These unpretentious ornamental plants, wherever they grow, form beautiful evergreen islands that caress the eye at any time of the year.

Adding an article to a new collection

Low-growth juniper is great for growing in borders and mixborders. Do not believe? We immediately collected 6 proofs of this undeniable fact!

Perhaps thinking about juniper, you first of all imagine the impressive size of a spreading shrub, which is used to create hedges. We want to share with you a few stylish landscaping ideas with low-growing types of juniper. Sure - you will like it!

1. Flower bed at the reservoir

Dwarf juniper is ideal for creating a curb along the garden path. A composition of two species of this shrub with grace frames the shores of an artificial pond.

Planted in the foreground juniper scaly varieties Blue old (Blue Star), one of the most popular perennials for rockeries and alpine slides. Because of the bush Blue old looks out Japanese dwarf juniper.

Left along the track is located Perovskaya swan-leafwhich makes an interesting lavender accent into the composition. Lilac theme catches and develops catnip.

The undoubted dominant of this flower garden is a bush miscanthus Adagio varieties. It can be replaced with lush blue lightning.

Also with a stunted juniper will be great neighbors hosts, and the company Perovskiy can make astilby.

2. Minimalistic border

It would seem that it may be easier to land a modest border of horizontal juniper along a wall or walkway? But the curb turns out very showy and stylish.

Considering that juniper is a sun-growing culture, this option is suitable for well-lit, non-shaded areas.

Spectacular varieties of horizontal juniper for border - Blue Chip, Ice Blue, Lime Glow.

3. Conifer Mixborder

Juniper perfectly "gets along" with other conifers. So why not create a coniferous corner on your site that will delight you all year round?

The basis of the composition can be blue spruceagainst the background of which the main “action” will be played. In the tree trunks, plant a few juniper bushes. In this case, used yellow-green juniper chinese, which creates a good color contrast with the pale blue needles of fir trees.

Juniper "sea" can be diluted with islets dwarf gray-fir (Konica).

Another yellowish accent adds yucca in the foreground.

In the middle lane we recommend planting frost-resistant yucca filamentous.

4. Eclectic flower garden

The gamma of this flower garden is various: here it is purple, and lavender, and different shades of green, and blotches of yellow. This eclectic! But all one variety unites one feature - dusty, as if shades muffled by summer heat.

The brightest accent of this composition is decorative. red plum (it is also called red leaf cherry plum). Despite its rather exotic appearance, she feels rather well in the middle lane.

Purple picks up Japanese palm maple. Unfortunately, this culture freezes out at temperatures below –15 ° C, so it is only suitable for cultivation in the southern regions.

Next left landed dwarf dwarf pine, more to the right - dwarf blue spruce. Ornamental shrubs with white flowers - panicle hydrangeaTarwida and hydrangea. Between hydrangeas planted spirea varieties Little Princesses.

Left foreground - Perovskaya swan-leaf. Yellow flowers - hairy orebeckia. Plant with pink flowers on the right - annual cleomer.
Ground cover - juniper horizontal varieties Viltoni.

5. Duet with stonecrop

The main advantages of juniper - an interesting texture and a pleasant green gamma. This coniferous shrub of lavender, burgundy, salmon, coral shades sets off the winning side. That is why a good duet for juniper is obtained with a stonecrop.

In the photo on the left red cedar varieties Green Aul framed red-leaved viburnum and stonecrop varieties Otemn Joy. On the photo on the right juniper scaly growing next door to stonecrop varieties Dragons tan.

Sedum and undersized juniper can also be grown in a container.

In the composition in the photo used stonecrop false varieties Bronz Carpet and juniper chinese varieties Saybrook Gold.

6. In a company with daylilies

Juniper is a wonderful background against which daylilies can blossom in the full sense of the word.

Used in this mixborder juniper coastal varieties Golden pacific. Adjacent to him Himalayan Cedar varieties Eagle owl blue.

Red "highlight" in this mixborder add japanese palmate maple and Thunberg barberry varieties Orange rocket.

The main bright spot of the composition is daylily bushes. Yellow flowers of T varieties look best in this nice company.Askan Summer, Golden Hummer, Sweet Erikot Hani other.

Do you grow juniper? We are waiting for your ideas on our forum!

Variety of juniper species

Among the numerous species of juniper, with 70 variants, only 12 of them are common in the nature of Europe and Asia.

Juniper species are:

Common juniper is the most unpretentious species, widely spread not only in the mountains, but also near the marshes. This species can grow in the form of a tree, reaching a height of 12 meters, as well as a spreading bush with a height of 1 meter.

This type of juniper has several varieties, among which the most popular:

Hibernika - an elegant tree with a dense kolonovidnoy crown, the maximum size of which reaches 4 meters,

Suesika is an unpretentious dense shrub up to 8 meters high, having the widest crown diameter among other varieties up to 1.5 meters,

Sentinel - a narrow pyramidal tree up to 4 meters high, with high frost resistance,

Schneverdinger Goldmahangel - vigorous plant up to 3-5 meters in height with thin light green needles, used to create plant fences and landscape compositions,

Candelabriformis, Horstmann, Mayer - a group of weeping varieties, characterized by low size and used for pictorial decoration of reservoirs,

Erecta, Arnold, Bakony, Gold Cone - compact slim sorts of narrow shape, reaching 2 meters in height,

Green Carpet, Gold beach, Hornibrookii, Depressa, Repanda, Gold Coin, Golden Juniper - dwarf plants with open crown, often used in alpine compositions.

Cossack juniper is the most common and unpretentious species, frost-resistant, drought-resistant, but light-loving shrub, having a small height of up to 1.5 meters and creeping along the ground. This species is common in the rocky mountainous terrain and on sandy hills; it is characterized by a bark of bright brown color and a bright coniferous smell.

The Cossack juniper presented in the photo has toxic properties, its extract is used in the treatment of certain skin diseases.

Daurian juniper is a slow-growing creeping coniferous shrub with branches up to 0.5 meters high. It easily tolerates frosty winters and drought, is capable of self-rooting of its shoots, reaching 3 meters, and its trunk is covered with soil.

Juniper high - a long-lived tree-like sun-loving plant, having a sprawling pyramidal gray-gray crown, is drought tolerant and reaches up to 15 meters in size. The plant is used in ornamental gardening, as well as in carpentry craft.

Juniper virginsky - high drought-resistant and frost-resistant plant, very popular in the decorative art of design, including the creation of plant fences due to the fact that it is amenable to shearing. A plant native to the North American continent, common in mountainous and river terrain.

Frequently used juniper virginska for decorative compositions are:

Canaertii (tree with dark green needles and a lot of bluish blue cones, reaching 7 meters in height),

Glauca (densely branched tree up to 5 meters high in columnar shape, having a silver tint)

Pendula (fast-growing tree of green-blue color with spreading hanging branches),

Burki (an attractive variety of virgin juniper, having needles of a bluish-green shade with a pyramidal crown shape).

Juniper is spiny - a thermophilic long-growing plant, popular in the southern territories when creating living fences. The plant is spread on the Mediterranean territory and the Crimean coast.

Coastal juniper is a creeping shrub with light green needles and round dark blue cones. The plant is whimsical, loves heat and light, while resistant to drought and salt in the soil. Shrubs transplanted hard, during the winter should be covered. This type is often used when creating alpine slides in small areas.

Popular decorative species

Juniper is an attractive plant for decorating a garden, and some of its species are distinguished by special decorative properties that attract land designers. Among these types of juniper, in natural conditions not growing in our area, are the following:

Rock juniper - a tree with a narrow low crown and blue scaly needles, resistant to drought and poorly tolerant frost, shade and strong wind, grows on rocky terrain,

Chinese juniper - an attractive slow-growing decorative plant, characterized by various types of crown, can be in the form of a tall tree or shrub, requiring the presence of moist fertile soil and plenty of light. Used for decoration of hills and slopes,

Horizontal juniper - a creeping shrub that has long creeping branches and needle-shaped needles of a bluish-green or silver color, grows in a hilly and coastal sandy zone.

Varieties of juniper used for landscape design

Common juniper, which is a tall sprawling shrub with needles that have a slightly bluish tint. Its needles are very prickly and have a needle-like shape. If we consider this species for landscaping a country site, then garden forms are usually grown, such as dwarf and column-like shrubs. By the way, to create alpine slides the most suitable are dwarf,

but to create hedges - columnar junipers. However, for group or single planting, they also fit. The most common forms of this type are Compressa, Green Carpet, Sentinel and Repanda.

Most often used for group plantings or for rock garden. The most common varieties include Stricta, Olympia and Blue Alps.
Juniper horizontal is a creeping low shrub with branches pressed to the ground and short needle-like or scale-like needles, the color of which may be different - it depends on the variety. The needles can have green, gray-green, blue or silver-blue shades.

The best way to use this plant is for decoration of decorative borders, slopes or for design of rocky terrain.
Juniper sweetie is a very miniature shrub no more than half a meter tall with very beautiful silver-blue needles, refers to a creeping plant species that occupies an area of ​​not more than 3 square meters. The ideal plant for creating alpine slides.

Let's talk about the features of planting juniper

The fact is that any kind of juniper (especially Cossack) needs special conditions in the process of disembarkation. First of all, you should always remember that this plant is planted exclusively in sunny areas, otherwise it will simply lose its decorative properties. The exception to the rule is only juniper. In landscape design it is important to take into account the fact that between these plants there must be a distance of at least half a meter (this is if a juniper is a small species) and a half - two meters for large plant species. Otherwise, subsequently there will be no distance between them, besides, they will begin to shade each other. Another important point - you should not plant them next to low-growing plants, which will lack either light or food. The best option is to plant a juniper around the perimeter of the house, as well as in front of the house.

Thus, you get some kind of original hedge. Sometimes the plant is staggered throughout the site or, for example, near a rock garden. After that, pots with young plants are placed in the order in which they are planted. Container plants must be well saturated with moisture, for which they are kept for two hours in a container with water. Next, a pit is prepared, which should be a little larger than the pot itself. Before planting plants, the site is recommended to dig up to the depth of a shovel, clean up from any debris and fertilize. At the bottom of the pit, a drainage layer is made, for example, from sand or broken brick. The layer should have a thickness of 15 to 20 cm. Then the roots of the plants are filled with soil mixture of sod, sand and peat, while the peat should be two parts all the mixture, and the other components - one by one. If the plants are large, the root neck at the time of planting should be located slightly higher than the edges of the ground surface.

The use of juniper in landscape design

Since this plant is unusually beautiful, it is widely used for gardening gardens. Tree varieties, for example, are used in group or single variants of park plantings. With the help of these plants, you can create a wonderful hedge. Low-growing species and dwarf species are most widely used in rock gardens and rockeries, i.e. in stony gardens.

There are cases when juniper is planted to prevent erosion, because it holds the soil well. In the background, as a rule, high columnar varieties with green or blue needles, imitating blue distances, are planted,
It should be remembered that the plant categorically does not withstand gas pollution, because "Love" only environmentally friendly areas. Therefore, for the landscape design of the megalopolis the use of this plant is excluded.

What styles of landscape design is suitable juniper

Despite all the beauty of an evergreen plant, its harmonious presence is appropriate only with certain stylistic directions of landscape design. For example, juniper will be perfectly combined with the Scandinavian style, which has clear geometric shapes, as well as spaciousness and naturalness. Juniper, having a bright colored needles and located on the background of moss, lichen and heather, will look extremely profitable and impressive, acting as an expressive accent of the composition.
If the plot is decorated in the English style, then it is simply unthinkable without juniper. However, if dwarf varieties are the most suitable for the Scandinavian style, in this case, larger types with more relaxed shades (green or blue) are appropriate. Those. The plant should not be an accent in this restrained style, but should serve as the final element to give the composition a finished look.

Juniper Neighborhood with Other Plants

To begin with, juniper is a magnificent plant, but in itself it is not of such interest as in combination with other representatives of the plant world. However, not all plants withstand such a neighborhood.

For example, pampered roses, as well as peonies and clematis should be planted at a distance of at least two meters from conifers. Moreover, the gaps between the hvoyniki, it is desirable to mulch and pull or use dumping with the help of decorative chips.

Ground cover, for example, of evergreens, such as thyme, bryozoans, zhivuchka, kamnelomka, etc. In this way they will create a background and at the same time protect against the appearance of weeds. Mulch and dumping perform the same functions. For mulching suitable peat, walnut husks, pine litter, shredded bark, etc.
If the juniper is planted in a permanent place, do not place it at close range - the landscape will be monotonous. If the site is rocky, then it is very advantageous to shade the simplicity of plants using barberries or dwarf heathers. On a sunny lawn, especially if there is a stream or a flower garden next to you, yellow and orange spireas are perfect for your juniper. When making the entrance, as well as lawns in front of the house, juniper is best combined with other conifers. If a stone is used in the composition (granite chips or natural boulders), it looks more original and charismatic.

In winter, juniper, like any other coniferous plant, is the real king of the whole landscape, playing the most important role (of course, if he does not need shelter). Most importantly, remember that juniper will not be categorically combined with lush cultures and flowers with large buds - this must be considered when creating landscape design. Of course, if you approach this question skillfully, you can achieve unity in this case, for example, using a stone, with which you can create transitions between these different plants. And you can apply glades planted with creeping plants. This is a well-known technique for creating alpine slides.

It follows from the above ...

Summarizing the above, it can be noted that planting a juniper in the garden can solve several problems:

  • creation of color accents (spots),
  • creating a favorable background for flowering plants,
  • slope reinforcement
  • creating a hedge
  • cultivation of medicinal plants (juniper cones are widely used in folk medicine)

Planting seed

Planting material can be collected during the period when the berries darken. If you collect the seeds after the berries darken, they will sprout for a long time.

After collecting the seeds, it is necessary to stratify. For this purpose, they take a box, fill it with a wet mixture of sand, peat, moss. Place seeds in it. Cover them with another layer of the mixture. For the winter, the boxes should be taken out onto the street and left in the cold for 5 months. During this time, the seeds are hardened, which ensures faster germination.

In May, stratified seeds are extracted, planted in the garden. It is necessary to care for them in the same way as for other plants: water, loosen the soil, weed. Seedlings are then transferred to a permanent place.


In this way it is very good to reproduce exactly the juniper Repanda. In spring, young branches are cut off from the most beautiful and large tree. The size of the cutting should be about 10 cm. Planting material must be removed from the needles, placed in a solution that promotes the intensive formation of roots.

Then the cutting is placed in sand or peat mixture. Substrate should be moistened, cover with a film and leave to form roots. This process should occur in a dark place.

Such an artificial greenhouse should be periodically opened for the purpose of ventilation. Substrate need to constantly moisturize. Under favorable conditions, the roots are formed in a month and a half. Only after the successful formation of roots, the cuttings are planted in open soil. Young plants should be covered in winter with branches of spruce and pine so that they do not freeze.

Watering and feeding

Fertilizers are applied once a year. For the normal development of the plant make nitroamofosku or universal fertilizer for coniferous plants.

The lack of soil moisture plant replenishes high humidity. In the heat of the juniper must be watered. This should be done in the evening. The shrub does not tolerate dry air; therefore, watering is best done by sprinkling.

This creeping juniper variety does not need pruning. The plant itself forms a beautiful rounded crown.

In the spring you need to remove dead and damaged branches. For the cultivation of juniper spring is the best time of year. To get the cuttings, you need prikopat otvodki. By autumn, they take root and become full-fledged seedlings.

Important! You can not immediately cut a lot of branches, because the plant can get sick.

Spring care

Since late February, the activity of the sun is gradually increasing. When it starts to snow, there comes a dangerous period for all types of juniper, including Repanda. Active sun can burn pine needles. To avoid this, you should carefully shade the juniper. The best material for this is burlap, delicate matter.

Spring care for juniper

When the snow melts completely, the covering material is removed. Pristvolny area cleared of foliage. The mulch is removed because its layer causes the root system to rot.

The soil in the spring digging or loosening. When it dries, it is recommended to place a new layer of mulch.

Diseases, pests

Juniper Repanda can suffer from such diseases:

  1. Rust. It manifests itself in a change in the color of the needles. The cause of the occurrence is animal feces and high salt concentrations in the soil.
  2. Yellowing of the needles occurs with an excess or lack of moisture.
  3. The appearance of red growths on the branches indicates a fungal infection of juniper.
  4. When the fungus Schutte changes the color of the needles to orange. Then growths appear on it. The weakest plants are most at risk.
  5. Drying of the bark and branches is provoked by fungi that cause the growth of warts and longitudinal ulcers.

Juniper can infect such pests:

  1. Aphid. To get rid of it, you need to take measures to kill ants. They are affected by insecticides: Aktara, Decis, Fufanon.
  2. Active reproduction of the shield insects leads to the curvature of the shoots, the death of the bark. They are harvested by hand, destroyed by those insecticides that are used to combat ants.
  3. The spider mite gradually covers the entire web with a thin web. You can get rid of it with periodic irrigation of plants with cold water. Ticks are destroyed by Vermitek, Fufanon, Fitoverm.

Juniper RepandaWill be an excellent choice for landscape design:

  • decoration of rock gardens, rocky areas, paths,
  • filling in spacious places
  • greening slopes and uneven terrain (in the latter case, it helps to prevent soil subsidence),
  • masking uneven terrain,
  • decoration and gardening of balconies, flat roofs, terraces, entrances to the premises,
  • decoration of parks and squares.

Common juniper Repanda is a beautiful evergreen shrub. Care of it is simple and consists in regular watering, mulching, protection from pests. With this shrub you can create magnificent compositions in the garden.